Backlight Display Mod

This article is in progress.

Soldering Points

There are two positions you can solder the wires for the backlight kit. This is the same for Game Boy Light. With the Game Boy Light, the original backlight is more easily replaced. The Game Boy Pocket LCD has a reflective layer that needs to be peeled away.

Position 1 (Recommended)

Position 2

Install video courtesy of This Does Note Compute.

This video is out of date and shows a resistor which is now built into the V3 Backlight and shows the red wire going to an incorrect point. Please disregard the resistor and install the red wire as seen above only.

YouTube

Troubleshooting