# 🔩 Build Guide - GC Ultimate Kickstarter Edition

# Build Precautions


:::warning
Please read all of these precautions before viewing our build guide


**Watch the entirety of the build guide videos before starting your own build.**  


1. The shorter T6 screws are a bit short and have a light grip on the internal posts. 
2. Only tighten these screws gently to hold the PCBs to the front shell. 
3. These do not need to be too tight, otherwise you will run the risk of stripping the threads.
4. Do NOT overtighten these screws.
5. The larger T8 screws are fine and you can tighten these with more confidence. 

:::


# FCC ID Label

Use the included FCC ID sticker included with your controller kit to ensure that the appropriate certification marking is visible.

 ![](https://docs.handheldlegend.com/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzLzU5ZGZiY2Y1LTNjZGEtNGY4OC1hMDAyLWViYzFkNmQ5NjMyOS80MGRkMDNhYS1iZjY1LTQ5MmUtODBhNS1kZjBjNTY0MDA3MWEvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTUzMTEwMDAsImV4cCI6MTc5NTM5NzQwMH0.XxFeNtS_CMcF2sAdEiIIZDkthWTnquc_H5bwbiVcotI " =684x625")

# Required Tools

* Torx T6 Screwdriver
* Torx T8 Screwdriver

## Recommended Parts

* Scotch tape or Kapton tape
* Cotton pad
* Tweezers

# Haptic Actuator Installation Note

Install a small cut out square of cotton pad into your shell to help produce better transfer of vibrations from the actuator to the shell.

Here’s an example of the size square for each side.

 ![](https://docs.handheldlegend.com/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzLzU5ZGZiY2Y1LTNjZGEtNGY4OC1hMDAyLWViYzFkNmQ5NjMyOS8zMGE1ZDg5Ni0wM2U4LTQ4Y2YtODdiZi1jYWU0Y2U3NjhlY2MvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTUzMTEwMDAsImV4cCI6MTc5NTM5NzQwMH0.EL9rX-45FCi_n0cG_Jrd0TAabqptsxNKJUmDxogvbGk " =380x505")


And here’s where I recommend installing these before assembly.

 ![](https://docs.handheldlegend.com/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzLzU5ZGZiY2Y1LTNjZGEtNGY4OC1hMDAyLWViYzFkNmQ5NjMyOS8wMTU2ZTIwYy0xNjZkLTQyZDgtOGFlZC0zZWQ5NjYzNTM5NzcvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTUzMTEwMDAsImV4cCI6MTc5NTM5NzQwMH0.khJY5mfzx0D-0qoJGe_yPmbBzZ0y-zTVltnwP4fXWXQ " =1913x1440")


## PCB Latch Guide


:::warning
Damage to the latches are not covered under warranty. Use caution when working with the latches. 

:::

[https://www.youtube.com/watch?v=Y26pkMoT0To](https://www.youtube.com/watch?v=Y26pkMoT0To)

## Base Build with Analog Triggers

Watch this FULL video to see how the whole controller is assembled first.

[https://youtu.be/VytpzJiGIQ0](https://youtu.be/VytpzJiGIQ0)


## Alternate Mechanical Trigger Build Steps

If you are setting up your GC Ultimate controller to be built with mechanical triggers, watch this video guide.


:::info
After installing the mechanical triggers, [be sure to disable the analog triggers in the configuration app!](https://docs.handheldlegend.com/s/portal/doc/settings-guide-hhl-gamepad-config-l1CotarbxU#h-input)

:::

[https://youtu.be/8BTy2GuIois](https://youtu.be/8BTy2GuIois)


## User Guide

Proceed to our [User Guide](/doc/c291c6dc-c4c0-4731-b1d6-88890621eab1)  for more details on how to use your GC Ultimate.