IPS LCD Kit

This is our install guide for the GAME BOY POCKET IPS LCD KIT - FUNNYPLAYING

Video

YouTube

Getting Started

This kit requires the soldering of one power wire and an optional touch sensor.

Required Tools and Parts

  • Tweezers

  • J1 (Japanese Industrial Standard) Screwdriver

  • Y1 Tri-point screwdriver

Take Inventory

Ensure you have all the parts included with your kit. See below:

The Gameboy Pocket IPS LCD Kit Includes:

  • 1 x IPS LCD

  • 1 x GBP IPS Ribbon Cable

  • 1 x 3M adhesive installation foam

  • 1 x Touch sensor

  • 1 x Wire

Before You Proceed

  1. Fully disassemble your Gameboy Pocket

  2. Test the kit before installation! Once the display is mounted it cannot always be safely removed. We ask that you test the kit by hooking it up before removing the screen protector and before fully mounting the display.

Since soldering is required for dry testing this kit, soldering the power wire will not void the return policy.

Shell Modifications

If you plan on using this screen in an OEM shell, you will need to trim all the plastic highlighted in blue. Make sure to constantly check the fit of the screen, you don't want to remove too much material.

Installing The Mod

After you've modified your shell, it's time to begin installing the mod. First thing to do is to place your display and it's ribbon cable into the shell. If you are using the adhessive, now is the time to apply it before placing the screen.

Once you have your screen in place, you can begin putting the motherboard of the console back into place.

Once you have your motherboard in place, you can connect your ribbon cable, exposing the two pads that you can solder to.

This will expose the two pads that are availble for soldering. The right pad is the power wire and will connect to the first pin from the left of the power switch.

From this point you are technically done, you can button your console up and begin playing.

Optional Soldering

This kit also includes a touch sensor which will just float in the case should you decide to install it.

The touch sensor can then be positioned in the case however you like it.

From here you can put your console back together completely!

Troubleshooting