Kickstarter Edition
Firstly, thank you to all backers for making this project a reality.
This is the first gamepad that we’ve produced on this scale. I hope you get as much enjoyment out of your controller as I have had putting it together!
Please take the time to read through all documentation here before proceeding with your build!
Take Inventory
You just got your kit presumably, and you scanned a code, and now you’re here!
Please ensure you have all of the listed items below
Extra Membrane Piece
This membrane is an extra piece. We use existing GameCube controller membranes on the market, and we do not use this part.
Base Kit
The ‘Base Kit’ is what you receive if you backed any tier.
Item | Notes |
|---|---|
Shell Kit | Includes shell, trigger bracket, menu buttons, a light pass-through piece, two Kailh adapter stems, and two trigger membrane holder pieces |
ABXY Button Set | |
Split Dpad Set | |
Trigger Set | Includes ZL, ZR, L and R triggers |
Button Membranes | These are a transparent color |
Joystick Cap Pair | One large stick, one small stick |
Screw kit | Includes Torx T6 and T8 screws |
Spring Kit | Includes two springs for analog triggers |
Analog Trigger Kit | Includes two PCB paddles, and two potentiometers for the analog trigger setup |
Mechanical Trigger Kit | Includes two mechanical switch PCBs for the mechanical trigger setup |
Main PCB | |
Sub-stick PCB | C-Stick PCB |
Gateplate Set | One round gateplate, and one octagonal gateplate |
Haptic Actuators | 2 Haptic Actuators for rumble/haptic feedback |
Inventory Complete
After confirming that you have all of the above items, you’re ready to proceed with our Flashing Guide
Next, view our Build Guide
Finally, view our User Guide