Laminated IPS LCD Kit

• Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit. A dry run or test fit means the kit is not installed in the shell. This includes the use of adhesives, brackets, and any performed soldering. All ribbon cables should have no bends or creases in them. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. Backlight kits that have been installed are not eligible for replacement or return. Since soldering is required for dry testing this kit, soldering the power wire (BAT) will not void the return policy. Any other soldering or install steps will void the warranty.

• LCD may break if put under too much pressure or dropped. Please exercise extreme caution when installing.

• You do not need to purchase a separate lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens.

We highly recommend purchasing the pre-cut shells from Hispeedido to avoid pressure issues caused by trimming the shell yourself. As per our policy, once an LCD kit has been installed, it no longer qualifies for replacements. Use the non-recommend shell at your own risk.