# ⬆️ Manually Enter Bootloader Mode

# Trouble Updating GC Pocket+?


1. Disassemble your adapter.
2. Locate the bootloader button on the rear side of the PCB (shown in the image below)
3. Press and hold this button while connecting to a PC with a USB-C cable.
4. Find the USB flash drive device, and proceed with flashing firmware.

 ![](https://docs.handheldlegend.com/api/files.get?sig=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJrZXkiOiJ1cGxvYWRzLzU5ZGZiY2Y1LTNjZGEtNGY4OC1hMDAyLWViYzFkNmQ5NjMyOS9iN2ZmYTE5Ni05ZDU1LTQyMGQtOGJkNC05MmY4MjZiMWJkZTgvaW1hZ2UucG5nIiwidHlwZSI6ImF0dGFjaG1lbnQiLCJpYXQiOjE3OTM4MTYxMDAsImV4cCI6MTc5MzkwMjUwMH0.8HTlYaFgcTO5kJVswplP37yg6uc5K3BfPU78zJ9Ue1Y " =512x503")