# 🎮 Super Gamepad+

The **Super Gamepad+** is an SNES-style controller with Bluetooth, USB-C and Retro-C ports for real consoles. It runs HOJA firmware and is configured with [HHL Gamepad Config](https://hoja.handheldlegend.com).

|     |     |
|-----|-----|
| **Wireless** | Bluetooth (Switch, Steam, and Wii after the [wireless module update](https://docs.handheldlegend.com/s/portal/doc/update-the-wireless-module-esp32-vhX2Im50kN)) |
| **Wired** | USB-C, plus SNES/NES, N64 and GameCube with a [Retro-C cable](https://docs.handheldlegend.com/s/portal/doc/retro-c-cables-qPUP8WwnAg) |
| **Battery** | Rechargeable over USB-C |

## Power

* **Turn on:** hold **Select** for a few seconds until the controller turns on.
* **Turn off:** hold **Select** for 3 seconds, then let go.
* **Plugged into USB**, it turns on and runs wired.

## Home and Capture

The Super Gamepad+ has no Home or Capture buttons. Use:

* **Select + R** for **Home**
* **Select + L** for **Capture**

These don't apply in SNES mode, and **L + R + Select + Start** (the soft-reset combo many SNES games use) passes through unchanged.

## Modes

Hold a button while you turn the controller on or plug it in. The full table is on [Modes & Pairing](https://docs.handheldlegend.com/s/portal/doc/modes-pairing-hoja-controllers-H61Dy3zPjm).

| Hold | Mode | Use it for |
|------|------|------------|
| A    | Switch | Nintendo Switch, phones and tablets, HHL Gamepad Config |
| B    | Steam | PC and Steam Deck, HHL Gamepad Config |
| X    | XInput | Windows PCs, wired |
| Y    | Slippi | Slippi / Dolphin, wired |
| D-pad Left | SNES / NES | A real SNES or NES, with a Retro-C cable |
| D-pad Down | N64  | A real N64, with a Retro-C cable |
| D-pad Right | GameCube | A real GameCube or Wii, with a Retro-C cable |
| D-pad Up | Wii  | A Wii, as a Wii Remote (needs the HCI bridge wireless firmware) |

With no button held, it starts in its default mode (**Auto** on current firmware), which you can change on the **Gamepad** page of the app.

## Pairing

* **Switch, phone or tablet:** hold **A + Start** while you turn it on.
* **PC or Steam Deck:** hold **B + Start** while you turn it on, then pair from the Bluetooth settings.
* **Wii:** hold **D-pad Up + Start**, then press SYNC on the Wii.

Full steps: [Modes & Pairing](https://docs.handheldlegend.com/s/portal/doc/modes-pairing-hoja-controllers-H61Dy3zPjm).

## Updating

The Super Gamepad+ has two firmwares: the controller's, and the wireless module's.

* **Controller firmware:** connect to [hoja.handheldlegend.com](https://hoja.handheldlegend.com) and press **Update now** when offered. Update mode by hand: hold **L + Start** while plugging in. See [Update Firmware](https://docs.handheldlegend.com/s/portal/doc/update-firmware-hoja-controllers-KoFvPA77o1).
* **Wireless module:** update it from the **Wireless** page, after the controller firmware. Update mode by hand: hold **R + Start** while plugging in (the lights pulse orange). See [Update the Wireless Module](https://docs.handheldlegend.com/s/portal/doc/update-the-wireless-module-esp32-vhX2Im50kN).

## More

* [Settings Guide](https://docs.handheldlegend.com/s/portal/doc/settings-guide-hhl-gamepad-config-l1CotarbxU): what each page of the app does.
* [Troubleshooting](https://docs.handheldlegend.com/s/portal/doc/troubleshooting-hoja-controllers-lRXmhGPb6L)
* [Disassembly Guide (Super Gamepad+)](https://docs.handheldlegend.com/s/portal/doc/disassembly-guide-super-gamepad-zEkxns04MG)

---

**Documents**

- [User Guide (Super Gamepad+)](https://docs.handheldlegend.com/s/portal/doc/user-guide-super-gamepad-ZCJzKM9emw)
- [Update Guide (Super Gamepad+)](https://docs.handheldlegend.com/s/portal/doc/update-guide-super-gamepad-w1HEi7hyD6)
- [Disassembly Guide (Super Gamepad+)](https://docs.handheldlegend.com/s/portal/doc/disassembly-guide-super-gamepad-zEkxns04MG)