User Guide (Super Gmaepad+)
The SuperGamepad+ features both wireless and wired features.
See our Update Guide (Super Gamepad+) on how to install the latest firmware. Firmware updates may include bug fixes or new features.
Configuration
Configuration includes setting your RGB colors, setting custom remap profiles, and more.
To adjust the settings on your controller, refer to our Hoja 2 Config Tool
Home/Capture Macros (Switch Mode)
To go Home, press Select+R Trigger.
To perform a Capture, press Select+L Trigger.
Wired Mode
Simply connect your SuperGamepad+ via a USB-C cable to enable wired modes.
Holding down one of the alternate mode buttons while plugging in will boot into the desired mode.
Wireless Mode
To power on the controller in wireless mode, hold the Select button for a few seconds until the controller turns on.
Holding down one of the alternate mode buttons while powering on the controller will boot into the desired mode.
Pairing to Switch
To pair your SuperGamepad+ to Nintendo Switch consoles, go to Find Controllers > Change Grip/Order from the Switch home screen menu. Hold Start while powering on the controller to enable pairing mode. The controller will connect. The connection is remembered the next time you power on your controller.
Pairing to PC
Hold X while turning the controller on. The controller will flash green to indicate wireless XInput mode.
In Windows, go to your bluetooth settings > Add device > Bluetooth. Select your gamepad from the list. Due to issues with Windows bluetooth stack, this may take 1-2 tries. If it doesn’t work the first time, remove the device, reboot, and try again.
Modes Explainer
Button Combo | LED Color | Mode | BT | USB | Description |
|---|---|---|---|---|---|
Power + A | White | Switch/Config | ✔️ | ✔️ | USB Mode for Nintendo Switch or the Config App |
Power + X | Green | XInput | ❌ | ✔️ | USB Mode for Steam or games supporting XInput at 1000hz |
Power + Y | Cyan | Slippi | ❌ | ✔️ | USB Mode for Slippi on PC/Mac/Linux/Android |
Power + B | Blue | SInput | ✔️ | ✔️ | USB Mode for PC/Steam to support 1000hz input |
Power + Dpad Left | Red | NES/SNES | ❌ | ✔️ | Connect to an NES/SNES console using a Retro-C cable |
Power + Dpad Down | Yellow | N64 | ❌ | ✔️ | Connect to an N64 console using a Retro-C cable |
Power + Dpad Right | Purple | GameCube | ❌ | ✔️ | Connect to a GameCube/Wii console using a Retro-C cable |
Switch Mode
Locate and enter System Settings.
Scroll down until you see Controllers and Sensors.
Press A, then locate and enable Pro Controller Wired Communication.
You will see a prompt about NFC functionality, press OK.
You now have Pro Controller Wired Communications enabled.