Shopping List
Required Parts
These are all the required parts to build a ProGCC V3 and up from scratch with no prior pieces.
Controller PCB
ProGCC V3.2 Kit
Controller Shell Kit
Pro Controller Replacement Housing
Trigger Ribbon Cable (Not needed for V3.1 and up)
Switch Pro Controller Trigger Ribbon Cable
Screw Kit
Torx Screw Kit For Switch Pro Controller
Cables
USB-C TO USB-A CABLE | DATA AND POWER
RETRO-C GAMECUBE CABLE | USB-C TO GAMECUBE CABLE
RETRO-C N64 CABLE | USB-C TO N64 CABLE
RETRO-C SNES CABLE | USB-C TO SNES CABLE
Optional Add Ons
ExtremeRate Thumbsticks (Clear variants for the LEDs)
ExtremeRate Button Sets (Clear variants for the LEDs)
ExtremeRate Clear Membranes (Clear variant for the LEDs)
ExtremeRate Solid Shell and Grips (NOTE: You will still need an original Pro Controller housing, or the Pro Controller replacement housing linked above to complete the controller.)
ExtremeRate Transparent Shell (NOTE: You will still need an original Pro Controller housing, or the Pro Controller replacement housing linked above to complete the controller.)
ExtremeRate UV Print Shell (NOTE: You will still need an original Pro Controller housing, or the Pro Controller replacement housing linked above to complete the controller.)